- 行业: Textiles
- Number of terms: 9358
- Number of blossaries: 0
- Company Profile:
Celanese Corporation is a Fortune 500 global technology and specialty materials company with its headquarters in Dallas, Texas, United States.
A term that describes a tubular knit fabric without seams, e.g., seamless hosiery.
Industry:Textiles
The ratio of change in stress to change in strain between two points on a stress-strain diagram, particularly the points of zero stress and breaking stress.
Industry:Textiles
A layer of material, usually woven jute, polypropylene, vinyl, or latex foam, laminated to the underside of a carpet to improve body and dimensional stability.
Industry:Textiles
Green, orange, and violet, each of which is obtained by mixing two primary colors.
Industry:Textiles
The temperature at which the noncrystalline (amorphous) portions of polymer melt or become plastic. An inflection point or change is stress-strain properties occurs at this point; however, for most fibers, this change is small.
Industry:Textiles
Imperfect fabrics (woven or knitted) containing flaws in the weave, finish, or dyeing, and sold as “seconds.”
Industry:Textiles
1. A large, flanged roll upon which warp yarn is wound at the beam warper in preparation for slashing. 2. Small flanged or unflanged beams assembled side-by-side on the shaft of a warp beam for further processing.
Industry:Textiles
A fabric defect consisting of marks running warpwise in an evenly repeating pattern, caused by the improper setting of sections in silk system (or indirect) warping.
Industry:Textiles
1. A lightweight, open-weave, coarse fabric; the best qualities are made with two-ply yarns. Cotton scrim usually comes in white, cream, or ecru and is used for window curtains and as backing for carpets. 2. Fabric with open construction used as base fabric in the production of coated or laminated fabrics.
Industry:Textiles
1. Screw extruder in which frictional forces between the screw and the heated barrel contribute to rapid melting of solid polymer. This configuration is capable of high throughput. 2. System in which a screw feed is used to feed polymer to a melt grid and to maintain a constant pressure at the grid.
Industry:Textiles
