- 行业: Government
- Number of terms: 35337
- Number of blossaries: 0
- Company Profile:
A complete inspection of an aircraft and engine, required by the Code of Federal Regulations, to be accomplished every 12 calendar months on all certificated aircraft. Only an A&P technician holding an Inspection Authorization can conduct an annual inspection.
Industry:Aviation
The landing site and duration of flight are at the discretion of the pilot. Extended flight beyond the nearest approved landing area is not recommended.
Industry:Aviation
A relief valve in an instrument vacuum system required to maintain the correct low pressure inside the instrument case for the proper operation of the gyros.
Industry:Aviation
Preventing the accumulation of ice on an aircraft structure via a system designed for that purpose.
Industry:Aviation
A coastal breeze flowing from land to sea caused by temperature differences when the sea surface is warmer than the adjacent land. The land breeze usually occurs at night and alternates with the sea breeze that blows in the opposite direction by day.
Industry:Aviation
An engine- or exhaust-driven air compressor used to provide additional pressure to the induction air so the engine can produce additional power.
Industry:Aviation
An adjustable tab attached to the trailing edge of a stabilator that moves in the same direction as the primary control. It is used to make the stabilator less sensitive.
Industry:Aviation
The urgency of the landing is paramount. The primary consideration is to ensure the survival of the occupants. Landing in trees, water, or other unsafe areas should be considered only as a last resort.
Industry:Aviation
Water droplets that have been cooled below the freezing point, but are still in a liquid state.
Industry:Aviation
Direct routes, based on area navigation capability, between waypoints defined in terms of latitude/longitude coordinates, degree-distance fixes, or offsets from established routes/airways at a specified distance and direction.
Industry:Aviation
